Sullair Oil/Water Separators

Sullair Oil/Water Separators for All Lubricant Types

The importance of oil and water separators:

Compressed air systems generate condensate composed of water and other contaminants.
Failure to remove these contaminants is harmful to the environment.
In addition, this can cause a violation of the law, putting you at risk of penalties and other consequences.

Request a Quote.

Compare

Description

SP SERIES

The SP series is a cartridge-free option using molecular filtration.
How do SP units work?

Condensate flows into the depressurization chamber where the pressure is reduced.
The condensate then comes in contact with the media bed and binds to the special
modified alumina silicate to create a special ionic charge.
The monitor water is discharged through the drain.
Water from the monitor is discharged through the drain.
The separator must be replaced when the planned changeover period is reached or the water
becomes cloudy.

SULLIPRO Series

How do the SULLIPRO units work?

The SULLIPRO series uses a unique cartridge design.
Condensate flows into the depressurization chamber where the pressure is reduced.
The coarse dirt particles are then separated in a removable receiver.
The remaining condensate enters the pre-filter.
Designed with cartridge technology and a large active filtration surface, the prefilter binds oil droplets and absorbs the residual floating oil remaining in the filter chamber as the condensate flows from the inside to the outside.
The clean water is then channeled to a wastewater drain and the separated oil is contained within the main cartridge for proper disposal.
Once full, the landfill-compatible main cartridge can be disposed of normally in most cases.

Applications

SULLIPRO oil water separators are designed for reliable operation, easy service and are environmentally friendly.

Unique cartridge design

Lightweight

Maintains a clean and dry exterior, without getting your hands dirty!

Easy to change

Flow divider specifically designed for easy expansion.

Adjustable multi-port condensate inlets for easy installation

Exclusive absorption material for maximum performance

Reliable operation

Works with ALL compressor fluids, including poly-glycol

Environmentally safe

Meets environmental regulations

Cartridge can be disposed of normally

Safe for most sanitary landfills

Advantages

SP units offer an easy, convenient, clean and cost-effective solution to filter condensate discharge and keep your compressor room in compliance with EPA standards.

No maintenance required

No need to even open the unit

No pumps, sensors, or pre-separation filter pads

Not susceptible to mold and mildew

No dirty elements to change

No power consumption

No electricity needed

Internal decompression chamber

Can be placed anywhere

Less than 10 ppm carryover

Separates emulsified condensate

Disposal as special non-hazardous waste

Easy installation and replacement

Prime the unit and run condensate lines directly into the unit

Saves time and mess for service

When filled, replace with a new unit

Works with ALL compressor fluids

Handles all compressor fluids, including POLYGLICOL and SILICONE

Alumina silicate substrate media bed

Specific gravity, emulsification and relative humidity do not affect performance

Downloads

separadoresdeaguayaceitedesullair 1 Airtec Global

Download Catalog.

Categories

Search

Cart

Sullair Oil/Water Separators

Sullair Oil/Water Separators for All Lubricant Types