Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
S110 Portable Power Meter
Portable Power Meter
- They measure the actual power consumption in kW and accumulate the energy consumption in kWh of a three-phase load.
S120 – Compressed air oil sensor
Oil vapor sensor in compressed air systems
- Measures residual oil content in compressed air and other gases.
- Can be used for permanent or portable applications.
- Measures up to 0.003 mg / m³.
- Easy connection through a sampling hose and quick connect
quick connection. - Output signals: – 4 … 20 mA
– RS-485, Modbus RTU
– Relay switch (NO) - PID sensor for highest accuracy.
- Service and alarm indication via LED.
- Connectable to SUTO displays and data loggers as well as third party displays and control units.
- Integrated touch screen and data logger.
S130 – Laser particle counter
Compressed Air Laser Particle Counter
- Measurement and counting according to ISO 8573-1
- Can be used as portable and stationary instrument
- Output signals: RS-485 / Modbus / RTU, SDI (internal SUTO signal), relay switch (NO)
S211 / S215 / S220 Dew point sensor (-100 … +50 °C Td)
SUTO Dew Point Sensors
- Dew point with ranges from -100 … +50 °C Td
- Communication outputs 4…20mA, Modbus RTU, Modbus TCP.
- Dew point calculation
- Easy to install, with and without display screens available.
S230 / S231 Dew point sensor (-100 … +20 °C Td)
Dew Point Sensors for Hazardous Environments (ATEX, IECEx approval)
- High accuracy over the entire range
- Dew point calculation
- M8 connector and cable with open terminals.
S305 Dew Point Monitor (-50 … 20 °C Td / -20 … +50 °C Td)
Dew Point Monitor with Alarm (-50 … 20 °C Td / -20 … +50 °C Td)
- Measures down to -20 ° C dew point
- Accuracy: 1 … 2 °C.
- Compressed air supply via 6 mm quick connector.
S320 Display for Data Visualization
Data Display Screen
- Cost-effective and flexible display solution for industrial sensors and applications.
S330/S331 – Graphic Display and Data Logger
Graphical Display and Data Logger
- Saves Time: The display shows a clear picture of your system at any given time.
- Reduce Waste: Metrics quickly reveal problems and can be configured to alert you.
- Easy to Use: Easy-to-read metrics allow anyone in your operation to monitor them.
S401 Insertion type thermal mass flowmeters
Insertion type thermal mass flow sensor
- Insertion type flow sensor for flexible installations under pressure.
- Two calibration curves can be stored in the sensors internal memory.
- Display to view air flow and consumption Pipe diameters from 1″ … 12″ (others on request).
- Installation of the flowmeter in pressure (see video).
- Rugged IP65 class protection for harsh industrial environments.
- Isolated analog and pulse outputs or MODBUS / RTU interface.
- Thermal mass flow measurement, independent of pressure and temperature.
- Very fast response time. High accuracy and wide measuring range for measuring air and gas leaks.
- Due to the two calibration curves the sensor can be used with highest accuracy in two different gases.
S421 Thermal Mass Flowmeters with tubing
Thermal Mass Flow Sensor with Tubing
- The flow sensor is calibrated in the measuring section, this allows a very high accuracy.
- Two calibration curves can be stored in the internal memory of the flow sensors
Compressed Air Flow and Consumption Meters
Flow and Consumption Sensor for Untreated Air
- Flow and consumption measurement in humid air, steam or high speed applications
- Measurement at compressor outlet with moist air possible
- Direct flow measurement FAD of the compressor
Insertion Explosion Proof Flow Sensor
Flow Sensors for Hostile Environments
- Direct measurement of mass flow rate and standard flow rate without the need for pressure compensation.
- Wireless communication interface for on-site sensor configuration.
- Rugged version of our compressed air flow meter as in-line type.
Ultra sonic flow meter for liquids
Ultrasonic Flowmeter for Liquids
- Measures flow / consumption of various liquids
- Energy measurement with clamp-on temperature probe
- Bi-directional measurement
Ultrasonic flow meter for liquids with clamp.
Ultrasonic Flowmeter for Liquids
- Measures clean fluid: water, seawater, others on request
- OLED display for parameter settings and live values
S4C-FS – Intelligent Monitoring Software (Mobile)
Intelligent monitoring software
- S4M allows you to keep your plant under control by collecting data from all installed sensors and measurement systems in a single software solution.
Paginación personalizada aquí
