AirTec Global LLC

Accessories

Compressed Air is an energy source that has become instrumental for human progress over the last 100 years. It is widely used worldwide, but it is often used with significant inefficiency. The generation, treatment, storage, distribution and use of compressed atmospheric gas can become a very tricky business.

At Airtec, we want to simplify compressed air. By helping everyone understand the basics of compressed air and by bringing specialized services to the global industry, we will help make compressed air use more efficient worldwide, one kilowatt-hour at a time. Call or email us for quote, and find out how you can start saving today.

Accessories We Use

Air Receiver Tanks

Air Receiver Tanks store compressed air and are utilized to meet peak demand events where short duration, large air requirements exceed compressor capacity, In many cases, air receivers are an important part of the air compressor system control strategy. A large air receiver may allow a smaller air compressor to be used where peak air requirements are intermittent and of short duration.

Liquid Gauges

The liquid filled gauge dampens the effect of pulsation and vibration, while also perpetually lubricating the movement and keeping contaminates such as dirt away from all moving parts which will extend the life of the gauge.

Fittings, Strainers and Manifolds

The Compressed Air Fittings allow you to properly hook up your air compressor.

Filter, Regulators, Separators

Filter Separators and Oil Removal Filters remove water, dirt and rust, oil and solid particulate from your compressed air system. Pressure Regulators permit easy selection of the operating pressure.

Solenoid Valves

Solenoid Valves are available in a variety of flow rates and voltages. All models are UL Listed and are CE and RoHS compliant.

Silencing Muffler

EXAIR Silencing Mufflers help to reduce work area noise produced by air exhausting from cylinders, valves and other air powered equipment. Per OSHA Standard 1910.95(a), a worker must not be exposed to sound levels above 90 dBA for any eight hour shift of a 40 hour work week.

Swivel Fittings

EXAIR’s Swivel Fittings make it easy to adjust the position of the Air Nozzles, Air Jets, and Air Amplifiers. Swivel Fittings permit a movement of 25 degrees from the center axis for a total movement of 50 degrees. Type 303 and 316 stainless steel.

Air Control Valves

Our Air Control Valves come in both manual Valves and Foot Pedal Valves.

Thermostat

The adjustable thermostat is factory set at 95oF (35oC). It will normally hold ±2oF (1oC) of the desired temperature setting. It is rated 24V-240V AC or DC, 50/60Hz and is UL Recognized, CSA Certified.

Stay Set Hose

Flexible Stay Set Hoses bend to your application and will maintain their orientation until the position needs to be re-adjusted. The airstream can be aimed at precisely the correct spot.

Magnetic Bases

Magnetic bases are suited to applications where frequent movement of the Air Nozzle or Jet is required. The powerful magnet permits horizontal or vertical mounting that will hold the blowing position of the Stay Set Hose. A shutoff valve is provided that can be used to vary the force and flow.

Electronic Temperature Control

EXAIR’s digital ETCTM (Electronic Temperature Control) provides precise temperature control for your electrical enclosure. The LED readout of the ETC displays the internal temperature of the electrical enclosure (°F or °C) that is constantly being monitored by a quick response thermocouple.

Compressed Air Hoses

The Compressed Air Hoses are available in 10′, 15′, 20′, 30′, 40′ and 50′ length options.

 

Drum Dolly

Drum Dollies come in 5, 30, 55 and 110 gallon sizes. They can be used with the Reversible Drum Vac, Hight Lift Reversible Drum Vac, Chip Trapper, High Lift Chip Trapper, Chip Vac, Heavy Duty Dry Vac and Heavy Duty HEPA Vac.

 

PVC Hose for Conveying

EXAIR stocks 3/8″ (10mm), 1/2″ (13mm), 3/4″ (19mm), 1″ (25mm), 1-1/4″ (32mm), 1-1/2″ (38mm), 2″ (51mm), 2-1/2″ (64mm) and 3″ (76mm) I.D. PVC hose in lengths up to 50′ (15.2m). Ideal for conveying applications, the hose is very flexible and has a smooth internal bore that eliminates material build up.

 

Cabinet Cooler Side Mount Kits

EXAIR’s Side Mount Kits make mounting on the side of an electrical enclosure possible when there is limited space on the top or side. (NEMA 4 and 4X Cabinet Cooler Systems must be mounted vertically.) e Side Mount Kits maintain the NEMA rating of large and small NEMA Type 12, 4 and 4X enclosures. They mount in a standard electrical knockout (1-1/2 NPS).