Back to Products
S211 _ S215 _ S220 - Catalog (3 MB)
S211 _ S215 _ S220 - Manual (3 MB)
S211 / S215 / S220 Dew Point Sensor (-60 … +50 °C Td)
SUTO’s sensors lower maintenance costs due with stable, reliable measurements that also enable increased calibration intervals. The S211, S215, and S220 all offer optional displays.
- Fast: rapid response times ensure reliable readings
- Compact: can fit anywhere they are needed
- User-Friendly: optional displays allow spot-checks
Description
Description
SUTO’s S211 / S215 / S220 Dew Point Sensors are simple, accurate, easy to install, and incredibly reliable.The stainless steel sinter filter cap protects the sensor from dust and other impurities. Boasting fast response times and reliable measurement results, these dew point sensors provide accurate readings where you need them most. With an optional OLED display directly mounted on the sensor, anyone can access measurements easily at any time.
Benefits
Cost Effective
For relatively low price, you can ensure air quality
Reliable
No need to worry about downtime
Accessible
Easy-to-read metrics allow anyone in your operation to monitor
Features
Features
- Compact Design: Makes it easy to fit into the application
- Signal Output: 4 … 20 mA Modbus/RTU
- Pressure Sensor: Integrated as option
- Precise Measurement: ± 2 °C Td Accuracy
- Display Option: For on-site values
- Air Quality: Monitors humidity
Specs
Specs
- Process connection: G 1/2” (ISO 228/1), stainless steel 1.4301 (SUS 304)
- Operating conditions: Medium Temp.: -30 … +70 °C / Ambient Temp. : 0 … +50 °C / Ambient Humidity: 0 … 100 % rH
- Supply voltage: 15 … 30 VDC
- Materials Casing: Aluminum alloy / Process thread: Stainless steel 1.4301 (SUS 304) / Display cover: PC + ABS
- Classification / Approval: IP65 / CE
- Sensor protection: Sinter filter (stainless steel)
- Transport & Storage: Transport Temperature: -30 … + 70 °C / Storage Temperature: -20 … + 50 °C
- Weight: 180 g
- Measured gasses: (Medium) Air, Argon, O₂, N₂, CO₂*
- Output Signal: l 4 … 20 mA 2-wire, 4 … 20 mA 3-wire + Modbus/RTU
- Current consumption:
- 2-wire: 4 … 20 mA
- 3-wire: 40 mA @ 24 VDC
- 3-wire with display: 50 mA @ 24 VDC
- Accuracy:
- Temperature: +/- 0.3 °C
- Pressure: +/- 0.3 °C 0.5% FS
- Dew point:
- +/- 1 °C Td (0 … 20 °C Td)
- +/- 2 °C Td (-60 … 0 °C Td / +20 … +50 °C Td)
- +/- 3 °C Td (-100 … -60 °C Td)
- Sensor types:
- Temperature sensor: Pt100
- Pressure sensor: Piezo resistive type
- Display option: 0.66” OLED display, indicates the measured value and unit
Documents
S211 _ S215 _ S220 - Catalog
S211 _ S215 _ S220 - Catalog (3 MB)S211 _ S215 _ S220 - Manual
S211 _ S215 _ S220 - Manual (3 MB)
