S211 / S215 / S220 – Industrial Dew Point Sensors (–100 to +50 °C Td)
High-precision sensors for continuous dew point monitoring in compressed air.
- Precise dew point measurement with ranges from –100 to +50 °C Td
- High stability and reliability for continuous monitoring in industrial applications
- Communication outputs: 4…20 mA, Modbus RTU, and Modbus TCP
- Condensation point calculation to prevent moisture formation in the compressed air network
- Robust design for industrial environments
- Easy installation inline or in bypass
- Available with or without display for local reading
- Low maintenance and long sensor service life
- Ideal for compliance with compressed air quality standards (ISO 8573)
S230 / S231 – Dew Point Sensor for Harsh Environments
Accurate dew point measurement in potentially explosive atmospheres with ATEX and IECEx certification.
- Dew point measurement from –100 … +20 °C Td (depending on model)
- ATEX and IECEx certification for classified hazardous areas
- High accuracy and stability across the entire measuring range
- Advanced sensor technology (Polymer / Polymer + QCM)
- 4…20 mA output + Modbus/RTU (RS-485) communication
- Robust IP65 design for demanding industrial environments
- Calculation of multiple humidity parameters
- M8 connector and cable with open wire ends
S305 Dew Point Monitor
Dew Point Monitor with Alarm (–50 … 20 °C Td / –20 … +50 °C Td)
- Two measuring ranges available: –50 … +20 °C Td and –20 … +50 °C Td
- Accuracy of ±2 °C Td
- Plug & Play solution, ready to install
- 6 mm quick connection for compressed air
- LCD display with value and alarm indication
- Programmable pre-alarm and main alarm (2 relays)
- 4…20 mA output for PLC or SCADA systems
- Industrial IP65 housing, suitable for wall or panel mounting
S320 Display for Data Visualization
Data Display Screen
- Cost-effective and flexible display solution for industrial sensors and applications.
S330/S331 – Graphic Display and Data Logger
Graphical Display and Data Logger
- Saves Time: The display shows a clear picture of your system at any given time.
- Reduce Waste: Metrics quickly reveal problems and can be configured to alert you.
- Easy to Use: Easy-to-read metrics allow anyone in your operation to monitor them.
S401 – Thermal mass flow meter with insertion technology
Insertion thermal mass flow sensor, ideal for monitoring compressed air and process gases.
- Insertion-type flow sensor, ideal for flexible installations and direct measurement under pressure.
- Thermal mass flow measurement, independent of system pressure and temperature.
- High accuracy and wide measuring range, suitable for detecting everything from large flow rates to small air or gas leaks.
- Internal memory with two calibration curves, allowing the same sensor to be used with two different gases while maintaining maximum accuracy.
- Integrated digital display for real-time visualization of instantaneous flow and totalized consumption.
- Compatible with pipe diameters from 1” to 12” (other diameters available upon request).
- Can be installed without shutting down the pressurized line (see installation video).
- Robust housing with IP65 protection, designed for demanding industrial environments.
- Isolated analog and pulse outputs, plus MODBUS / RTU interface for integration with monitoring systems.
- Ultra-fast response time, ensuring stable readings even under fluctuating flow conditions.
S415 / S418 – Thermal Mass Flow Sensor
Precise measurement of flow and consumption of compressed air and industrial gases
- Flexible signal outputs: analog 4–20 mA or Modbus RTU digital communication, enabling easy integration into control and monitoring systems.
- High measurement accuracy: accuracy of up to ±1% of reading, ideal for applications requiring reliable consumption control.
- Real-gas calibration: capability to calibrate for up to two different gases, ensuring greater accuracy in specific applications.
- Direct measurement at the point of use: reliable and cost-effective monitoring of compressed air and nitrogen consumption, without the need for straight pipe runs or additional calculations.
S418-V – Thermal Mass Flow Sensor for Vacuum Applications
In-line sensor for precise measurement of flow, consumption, and absolute pressure in industrial vacuum systems.
- Thermal mass flow sensor specifically designed for vacuum applications.
- Direct measurement of true volumetric flow rate in vacuum, without bypass methods.
- No additional pressure or temperature compensation required, even under variable conditions.
- Integrated absolute pressure sensor for precise vacuum system monitoring.
- Internal data logger with large storage capacity for historical analysis.
- Integrated flow conditioner eliminates the need for straight inlet or outlet pipe runs.
- Wireless interface for configuration and adjustment via mobile app.
- Available signal outputs: 4…20 mA, pulse, and Modbus RTU.
- High measurement accuracy suitable for industrial vacuum applications.
- Gas-type threaded connection (ISO 228-1) available in DN8, DN15, DN20, and DN25.
S421 – In-line Thermal Mass Flow Meter
Thermal Mass Flow Sensor with Pipe Section
- Individual factory calibration on the complete measuring section, ensuring high accuracy and excellent repeatability even under variable flow conditions.
- Dual calibration curve stored in internal memory, ideal for operation with two different gases or different operating ranges without the need for recalibration.
- Integrated pipe design that ensures stable and reliable measurement by eliminating errors caused by irregular flow profiles.
- Fast response to flow changes, suitable for dynamic processes and continuous monitoring.
- Robust industrial construction, designed for continuous operation in demanding industrial environments.
- Direct mass flow measurement, reducing sources of error and simplifying commissioning.
S430 – Flow and Consumption Sensor for Compressed Air
Precise measurement of flow and consumption in untreated compressed air
- Precise measurement of flow and consumption in demanding applications with humid air, steam, and high-velocity flows.
- Designed for installation at the compressor discharge, even with undried or unfiltered air.
- Direct measurement of the compressor’s FAD flow, without estimates or correction factors.
- Pitot-type measurement technology, ideal for high-pressure and high-temperature conditions.
- High measurement stability, even under rapid flow variations.
- Suitable for large-diameter pipes, typical in main compressed air systems.
- Low maintenance, with no moving parts exposed to the flow.
- Robust and reliable solution for energy audits and compressor performance monitoring.
S450/S452 – Explosion‑Proof Flow Sensor (Insertion / In‑Line)
Flow sensor designed for harsh industrial environments and ATEX applications
- Direct measurement of mass flow and standard flow without the need for pressure compensation.
- Wireless interface for on-site configuration and monitoring of the sensor.
- Robust and durable design for harsh environments, including outdoor use (IP67).
- No moving parts, ensuring low maintenance and zero clogging.
- Compatible with explosive environments (ATEX/IECEx option).
- Supports a wide range of pipe sizes: insertion type for large diameters and in-line type for small diameters.
- Configurable outputs: 4–20 mA, pulse, HART, or Modbus, for flexible integration with industrial systems.
S461 – High‑Precision Ultrasonic Flow Meter for Liquids
Clamp‑on device for high‑precision liquid flow and consumption measurement.
- Non-contact measurement of flow and consumption for multiple liquids.
- Energy measurement with clamp-on temperature probes (optional).
- Bidirectional flow with separate counters.
- Easy installation and configuration via the S4C-US app.
- Compatible with pipes from DN40 to DN1200.
- Data logging and energy efficiency analysis.
- Outputs: Modbus, 4–20 mA, pulses, and alarms as required.
- Portable version available for temporary measurements.
S462 – External Ultrasonic Flow Meter for Liquids (Clamp-On)
External installation — fast and non-intrusive, with no need to cut into the pipe
- Non-intrusive ultrasonic measurement using Clamp-On technology, with no direct contact with the fluid.
- Compatible with clean liquids such as water, seawater, and other fluids upon request.
- Fast external installation, with no pipe cutting and no process interruption.
- Integrated OLED display for real-time value visualization and parameter configuration.
- Compact and robust design, suitable for industrial environments.
- High measurement accuracy and stability in continuous flow applications.
- Ideal for consumption monitoring and industrial process control.
S4C-FS – Intelligent Monitoring Software (Mobile)
Intelligent monitoring software
- S4M allows you to keep your plant under control by collecting data from all installed sensors and measurement systems in a single software solution.
S4M - SCADA Software
SCADA Software
- Integrated: access all SUTO products and third-party sensors in this central panel.
- Expansive: choose from a variety of parameters to measure your system.
- Scalable: grow with your operation.
S520 – Portable Dew Point Meter for Industrial Air and Gas
Portable solution for precise monitoring of dew point and pressure parameters in air and gas.
- Complete measurement of dew point, temperature, humidity, and pressure in air and gases.
- Internal data logging with direct analysis on the device screen, no additional software required.
- Two sensor options depending on the application:
- Sensor A: -100 … +20 °C Td for extreme moisture traces.
- Sensor B: -50 … +50 °C Td for standard applications.
- Intelligent dew point prediction for quick anticipation of results.
- Modern color touchscreen with intuitive interface.
- Integrated camera (optional) for audit documentation.
- Compatible with wireless printer, USB data export, and PDF report generation according to ISO 8573-1.
- Measuring chamber with parking function to keep the sensor dry and speed up response for each measurement.
Paginación personalizada aquí
