Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
Description
What you should know
The temperature transmitter is a sensor designed to measure the temperature of liquids, vapors, compressed air and gases within the permissible operating parameters. These parameters can be found in the technical data section. The temperature transmitter is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The temperature transmitter is mainly used in compressed air systems in industrial environments.
Applications
Current sensing on compressors for load/unload analysis.
Current sensing for power/energy measurement.
Evaluation of machine operating hours.
Advantages
Easy installation.
Wide measurement range.
Accurate current detection
4-20 mA output signal
Downloads
Related Products
Exair Vortex Tubes
A quarter ton of refrigeration in the palm of your hand!
- No moving parts, maintenance free!
- Get cold air down to -46 °C from your compressed air supply!
- Adjustable outlet temperature!
- Available in small, medium and large sizes!
Exair Vortex Tubes
A quarter ton of refrigeration in the palm of your hand!
- No moving parts, maintenance free!
- Get cold air down to -46 °C from your compressed air supply!
- Adjustable outlet temperature!
- Available in small, medium and large sizes!
Antistatic point ion generator – Ionizing Point Exair Gen 4
The Ionizing Point EXAIR Gen 4 is a single point antistatic ion generator designed for precise static neutralization in hard-to-reach areas — low cost, OSHA compliant, and maintenance-free.
- ✓Electromagnetically shielded high voltage cable for superior protection against abrasion and cuts.
- ✓Integrated ground design — no separate ground connection required.
- ✓Single point ionizer for precise static neutralization in targeted areas.
- ✓Low cost and reliable Ionizing Point EXAIR Gen 4 for industrial static elimination.
Antistatic point ion generator – Ionizing Point Exair Gen 4
The Ionizing Point EXAIR Gen 4 is a single point antistatic ion generator designed for precise static neutralization in hard-to-reach areas — low cost, OSHA compliant, and maintenance-free.
- ✓Electromagnetically shielded high voltage cable for superior protection against abrasion and cuts.
- ✓Integrated ground design — no separate ground connection required.
- ✓Single point ionizer for precise static neutralization in targeted areas.
- ✓Low cost and reliable Ionizing Point EXAIR Gen 4 for industrial static elimination.
Air Nozzles – Super Air Exair Nozzle
The Super Air EXAIR Nozzle delivers high-efficiency compressed air blowing with significant air savings and reduced noise levels — available in multiple materials and sizes for any industrial application.
- ✓Great savings of compressed air — higher discharge flow with lower air consumption.
- ✓Noise levels reduced by tens of dB — OSHA compliant safe operation.
- ✓Available in different materials and sizes for all industrial applications.
- ✓Reliable Super Air EXAIR Nozzle for blowing, cleaning, drying, and cooling operations.
Air Nozzles – Super Air Exair Nozzle
The Super Air EXAIR Nozzle delivers high-efficiency compressed air blowing with significant air savings and reduced noise levels — available in multiple materials and sizes for any industrial application.
- ✓Great savings of compressed air — higher discharge flow with lower air consumption.
- ✓Noise levels reduced by tens of dB — OSHA compliant safe operation.
- ✓Available in different materials and sizes for all industrial applications.
- ✓Reliable Super Air EXAIR Nozzle for blowing, cleaning, drying, and cooling operations.
Heavy Duty Dry Vac – Exair Heavy Duty Pneumatic Vacuum Cleaner for Dust and Powders
Easily vacuum granular material!
- Move more material in less time.
- Reinforced structure has greater wear resistance.
- No moving parts: no maintenance.
Heavy Duty Dry Vac – Exair Heavy Duty Pneumatic Vacuum Cleaner for Dust and Powders
Easily vacuum granular material!
- Move more material in less time.
- Reinforced structure has greater wear resistance.
- No moving parts: no maintenance.
Exair Digital Static Meter
Locate the source of the static problem!
- The Model 7905 Digital Static Meter allows for easy one-handed static measurements.
- In most cases, the highest voltage reading will indicate the source of the static problem.
- Sensitive and responsive, it indicates surface tension and polarity on objects up to ±20 kV when measured one inch (25 mm) away.
Exair Digital Static Meter
Locate the source of the static problem!
- The Model 7905 Digital Static Meter allows for easy one-handed static measurements.
- In most cases, the highest voltage reading will indicate the source of the static problem.
- Sensitive and responsive, it indicates surface tension and polarity on objects up to ±20 kV when measured one inch (25 mm) away.
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
The Super Ion Air Wipe EXAIR Gen 4 delivers a powerful 360° ionized circular air curtain with laminar airflow to eliminate static electricity on cables, hoses, pipes, and extrusion products — with no moving parts.
- ✓Instant 360° high laminar ionized airflow with 40:1 air amplification ratio.
- ✓No moving parts — completely maintenance-free operation.
- ✓Easy assembly and installation for cables, hoses, pipes, and extrusion products.
- ✓Reliable Super Ion Air Wipe EXAIR Gen 4 for industrial static elimination applications.
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
The Super Ion Air Wipe EXAIR Gen 4 delivers a powerful 360° ionized circular air curtain with laminar airflow to eliminate static electricity on cables, hoses, pipes, and extrusion products — with no moving parts.
- ✓Instant 360° high laminar ionized airflow with 40:1 air amplification ratio.
- ✓No moving parts — completely maintenance-free operation.
- ✓Easy assembly and installation for cables, hoses, pipes, and extrusion products.
- ✓Reliable Super Ion Air Wipe EXAIR Gen 4 for industrial static elimination applications.
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
