Pressure Sensors
Pressure Sensors
- The pressure sensor is designed to measure the pressure of compressed air and gases within the permissible operating parameters.
Description
The pressure sensor can measure the following values
Pressure in MPa. The pressure sensor is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The pressure sensor is mainly used in compressed air systems in industrial environments.
Applications
High accuracy and affordable industrial pressure sensor.
Any pressure and vacuum range.Excellent anti-interference capability (EMC, EMI).IP67 protection.
4 ... 20 mA. Loop powered. Modbus versions available.
Downloads
Related Products
Pneumatic Liquid Vacuum Cleaner – Drum Vac Reversible Exair
Pumps 100 liters of water in less than 90 seconds!
- Industrial-strength vacuum cleaner for liquids.
- No motors or propellers to clog or damage.
- It has no moving parts so it is maintenance free.
- It is reversible, i.e., it can vacuum or pump liquids.
Pneumatic Liquid Vacuum Cleaner – Drum Vac Reversible Exair
Pumps 100 liters of water in less than 90 seconds!
- Industrial-strength vacuum cleaner for liquids.
- No motors or propellers to clog or damage.
- It has no moving parts so it is maintenance free.
- It is reversible, i.e., it can vacuum or pump liquids.
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Intellistat Ion Air Nozzle
Powerful ionized air gun to eliminate static!
- No moving parts, maintenance free!
- High instantaneous ionized air flow!
- High charge decay rate (~5 kV / 0.5 s) !
- Ideal for manual, operator-dependent applications!
Intellistat Ion Air Nozzle
Powerful ionized air gun to eliminate static!
- No moving parts, maintenance free!
- High instantaneous ionized air flow!
- High charge decay rate (~5 kV / 0.5 s) !
- Ideal for manual, operator-dependent applications!
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
360° of high force ionized laminar airflow!
- No moving parts, maintenance free!
- Instant 360° high laminar airflow!
- Easy assembly and installation!
- 40:1 air amplification ratio!
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
360° of high force ionized laminar airflow!
- No moving parts, maintenance free!
- Instant 360° high laminar airflow!
- Easy assembly and installation!
- 40:1 air amplification ratio!
Adjustable Spot Cooler Exair
Cold air down to -34 °C using your compressed air cooling system!
- Instant cold air from the compressed air supply!
- Easy to install, with magnetic base for attachment!
- Adjustable cold air output for various applications!
- No moving parts so no maintenance required!
Adjustable Spot Cooler Exair
Cold air down to -34 °C using your compressed air cooling system!
- Instant cold air from the compressed air supply!
- Easy to install, with magnetic base for attachment!
- Adjustable cold air output for various applications!
- No moving parts so no maintenance required!
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
