Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
Description
What you should know
The temperature transmitter is a sensor designed to measure the temperature of liquids, vapors, compressed air and gases within the permissible operating parameters. These parameters can be found in the technical data section. The temperature transmitter is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The temperature transmitter is mainly used in compressed air systems in industrial environments.
Applications
Current sensing on compressors for load/unload analysis.
Current sensing for power/energy measurement.
Evaluation of machine operating hours.
Advantages
Easy installation.
Wide measurement range.
Accurate current detection
4-20 mA output signal
Downloads
Related Products
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Air Nozzles – Super Air Exair Nozzle
Nozzles and jets designed to achieve compressed air savings and reduced noise levels.
- Great savings of compressed air!
- Decrease of noise levels by tens of dB!
- Higher discharge flow with lower air consumption!
- Different materials and sizes for different applications!
Air Nozzles – Super Air Exair Nozzle
Nozzles and jets designed to achieve compressed air savings and reduced noise levels.
- Great savings of compressed air!
- Decrease of noise levels by tens of dB!
- Higher discharge flow with lower air consumption!
- Different materials and sizes for different applications!
Blow Guns – Air Guns Exair
Ergonomic and lightweight compressed air blowguns.
- Variable force and flow rates can be triggered by the trigger!
- Durable cast aluminum construction!
- Protective shields and extensions available!
- Variety of nozzles for different applications!
Blow Guns – Air Guns Exair
Ergonomic and lightweight compressed air blowguns.
- Variable force and flow rates can be triggered by the trigger!
- Durable cast aluminum construction!
- Protective shields and extensions available!
- Variety of nozzles for different applications!
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Exair Digital Air Flow Meter
Exair Digital Air Flow Meter
EXAIR’s Digital Flowmeter™, with data logging capability available, is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used, making it easy to identify costly leaks or inefficient air products. No cutting, welding, adjustments or calibration are ever required. It is designed for permanent or temporary mounting to a compressed air pipe. If the unit needs to be removed, blocking rings are available for most models. Available for measuring air flow in SCFM or m3/hr on 1/2″ thru 8″ Schedule 40 Iron Pipe, 25mm thru 101mm Aluminum Pipe and for Copper Pipe up to 4″. Consult the factory for NEMA 4 flowmeters.
Exair Digital Air Flow Meter
Exair Digital Air Flow Meter
EXAIR’s Digital Flowmeter™, with data logging capability available, is the easy way to monitor compressed air consumption and waste! The digital display shows the exact amount of compressed air being used, making it easy to identify costly leaks or inefficient air products. No cutting, welding, adjustments or calibration are ever required. It is designed for permanent or temporary mounting to a compressed air pipe. If the unit needs to be removed, blocking rings are available for most models. Available for measuring air flow in SCFM or m3/hr on 1/2″ thru 8″ Schedule 40 Iron Pipe, 25mm thru 101mm Aluminum Pipe and for Copper Pipe up to 4″. Consult the factory for NEMA 4 flowmeters.
Exair Ultrasonic Leak Detector
Exair Ultrasonic Leak Detector – Eliminating waste is the first step in a successful compressed air savings project.
- Find and eliminate costly air leaks in your system using EXAIR ultrasonic leak detector!
- Reduce the load on your compressed air generation system with EXAIR air leak detection technology!
- Detect steam, refrigerant gas, and vacuum leaks with ultrasonic leak detection systems EXAIR!
- Reduce your operating costs and the environmental impact of your operation with EXAIR ultrasonic leak detection solutions!
Exair Ultrasonic Leak Detector
Exair Ultrasonic Leak Detector – Eliminating waste is the first step in a successful compressed air savings project.
- Find and eliminate costly air leaks in your system using EXAIR ultrasonic leak detector!
- Reduce the load on your compressed air generation system with EXAIR air leak detection technology!
- Detect steam, refrigerant gas, and vacuum leaks with ultrasonic leak detection systems EXAIR!
- Reduce your operating costs and the environmental impact of your operation with EXAIR ultrasonic leak detection solutions!
Intellistat Ion Air Nozzle
Powerful ionized air gun to eliminate static!
- No moving parts, maintenance free!
- High instantaneous ionized air flow!
- High charge decay rate (~5 kV / 0.5 s) !
- Ideal for manual, operator-dependent applications!
Intellistat Ion Air Nozzle
Powerful ionized air gun to eliminate static!
- No moving parts, maintenance free!
- High instantaneous ionized air flow!
- High charge decay rate (~5 kV / 0.5 s) !
- Ideal for manual, operator-dependent applications!
Antistatic Ion Generating Bar – Ionizing Bar Exair Gen 4
Compact and robust design for static elimination in industrial environments.
- Low cost option for static elimination!
- No compressed air required for operation!
- Charge dissipation power up to ±5 kV!
- Effective up to 5 cm distance from the target!
Antistatic Ion Generating Bar – Ionizing Bar Exair Gen 4
Compact and robust design for static elimination in industrial environments.
- Low cost option for static elimination!
- No compressed air required for operation!
- Charge dissipation power up to ±5 kV!
- Effective up to 5 cm distance from the target!
