Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
Description
What you should know
The temperature transmitter is a sensor designed to measure the temperature of liquids, vapors, compressed air and gases within the permissible operating parameters. These parameters can be found in the technical data section. The temperature transmitter is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The temperature transmitter is mainly used in compressed air systems in industrial environments.
Applications
Current sensing on compressors for load/unload analysis.
Current sensing for power/energy measurement.
Evaluation of machine operating hours.
Advantages
Easy installation.
Wide measurement range.
Accurate current detection
4-20 mA output signal
Downloads
Related Products
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Antistatic point ion generator – Ionizing Point Exair Gen 4
Single point ionizer for point neutralization!
- Electromagnetically shielded high voltage cable!
- Shielded high voltage cable protects against abrasion and cuts!
- Integrated ground design requires no separate ground connection!
- Low cost!
Exair Digital Static Meter
Locate the source of the static problem!
- The Model 7905 Digital Static Meter allows for easy one-handed static measurements.
- In most cases, the highest voltage reading will indicate the source of the static problem.
- Sensitive and responsive, it indicates surface tension and polarity on objects up to ±20 kV when measured one inch (25 mm) away.
Exair Digital Static Meter
Locate the source of the static problem!
- The Model 7905 Digital Static Meter allows for easy one-handed static measurements.
- In most cases, the highest voltage reading will indicate the source of the static problem.
- Sensitive and responsive, it indicates surface tension and polarity on objects up to ±20 kV when measured one inch (25 mm) away.
Antistatic Ion Generating Bar – Ionizing Bar Exair Gen 4
Compact and robust design for static elimination in industrial environments.
- Low cost option for static elimination!
- No compressed air required for operation!
- Charge dissipation power up to ±5 kV!
- Effective up to 5 cm distance from the target!
Antistatic Ion Generating Bar – Ionizing Bar Exair Gen 4
Compact and robust design for static elimination in industrial environments.
- Low cost option for static elimination!
- No compressed air required for operation!
- Charge dissipation power up to ±5 kV!
- Effective up to 5 cm distance from the target!
Air Nozzles – Super Air Exair Nozzle
Nozzles and jets designed to achieve compressed air savings and reduced noise levels.
- Great savings of compressed air!
- Decrease of noise levels by tens of dB!
- Higher discharge flow with lower air consumption!
- Different materials and sizes for different applications!
Air Nozzles – Super Air Exair Nozzle
Nozzles and jets designed to achieve compressed air savings and reduced noise levels.
- Great savings of compressed air!
- Decrease of noise levels by tens of dB!
- Higher discharge flow with lower air consumption!
- Different materials and sizes for different applications!
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
Ionized Air Jet – Ion Air Jet Exair Gen 4
Effective way to remove static manually!
- No moving parts, maintenance free!
- High instantaneous air flow!
- More air volume with less energy consumption!
- 5:1 air amplification ratio!” ”What is the Exair Ionized Air Jet?
Ionized Air Jet – Ion Air Jet Exair Gen 4
Effective way to remove static manually!
- No moving parts, maintenance free!
- High instantaneous air flow!
- More air volume with less energy consumption!
- 5:1 air amplification ratio!” ”What is the Exair Ionized Air Jet?
