Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
Description
What you should know
The temperature transmitter is a sensor designed to measure the temperature of liquids, vapors, compressed air and gases within the permissible operating parameters. These parameters can be found in the technical data section. The temperature transmitter is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The temperature transmitter is mainly used in compressed air systems in industrial environments.
Applications
Current sensing on compressors for load/unload analysis.
Current sensing for power/energy measurement.
Evaluation of machine operating hours.
Advantages
Easy installation.
Wide measurement range.
Accurate current detection
4-20 mA output signal
Downloads
Related Products
Ionized Air Cannon – Ion Air Cannon Exair Gen 4
The Ion Air Cannon Exair Gen 4 delivers a powerful concentrated ionized air flow to eliminate static electricity and dust from surfaces, parts, and materials in industrial processes — quietly and efficiently.
- ✓No moving parts — completely maintenance-free operation with high instantaneous ionized air flow.
- ✓Adjustable flow and force using slats for precise static elimination control.
- ✓Base for easy mounting and placement in any industrial environment.
- ✓Quiet and efficient Ion Air Cannon Exair Gen 4 — reliable Gen 4 static elimination technology.
Ionized Air Cannon – Ion Air Cannon Exair Gen 4
The Ion Air Cannon Exair Gen 4 delivers a powerful concentrated ionized air flow to eliminate static electricity and dust from surfaces, parts, and materials in industrial processes — quietly and efficiently.
- ✓No moving parts — completely maintenance-free operation with high instantaneous ionized air flow.
- ✓Adjustable flow and force using slats for precise static elimination control.
- ✓Base for easy mounting and placement in any industrial environment.
- ✓Quiet and efficient Ion Air Cannon Exair Gen 4 — reliable Gen 4 static elimination technology.
Antistatic point ion generator – Ionizing Point Exair Gen 4
The Ionizing Point EXAIR Gen 4 is a single point antistatic ion generator designed for precise static neutralization in hard-to-reach areas — low cost, OSHA compliant, and maintenance-free.
- ✓Electromagnetically shielded high voltage cable for superior protection against abrasion and cuts.
- ✓Integrated ground design — no separate ground connection required.
- ✓Single point ionizer for precise static neutralization in targeted areas.
- ✓Low cost and reliable Ionizing Point EXAIR Gen 4 for industrial static elimination.
Antistatic point ion generator – Ionizing Point Exair Gen 4
The Ionizing Point EXAIR Gen 4 is a single point antistatic ion generator designed for precise static neutralization in hard-to-reach areas — low cost, OSHA compliant, and maintenance-free.
- ✓Electromagnetically shielded high voltage cable for superior protection against abrasion and cuts.
- ✓Integrated ground design — no separate ground connection required.
- ✓Single point ionizer for precise static neutralization in targeted areas.
- ✓Low cost and reliable Ionizing Point EXAIR Gen 4 for industrial static elimination.
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
The Super Ion Air Wipe EXAIR Gen 4 delivers a powerful 360° ionized circular air curtain with laminar airflow to eliminate static electricity on cables, hoses, pipes, and extrusion products — with no moving parts.
- ✓Instant 360° high laminar ionized airflow with 40:1 air amplification ratio.
- ✓No moving parts — completely maintenance-free operation.
- ✓Easy assembly and installation for cables, hoses, pipes, and extrusion products.
- ✓Reliable Super Ion Air Wipe EXAIR Gen 4 for industrial static elimination applications.
Ionized Circular Air Curtain – Super Ion Air Wipe Exair Gen 4
The Super Ion Air Wipe EXAIR Gen 4 delivers a powerful 360° ionized circular air curtain with laminar airflow to eliminate static electricity on cables, hoses, pipes, and extrusion products — with no moving parts.
- ✓Instant 360° high laminar ionized airflow with 40:1 air amplification ratio.
- ✓No moving parts — completely maintenance-free operation.
- ✓Easy assembly and installation for cables, hoses, pipes, and extrusion products.
- ✓Reliable Super Ion Air Wipe EXAIR Gen 4 for industrial static elimination applications.
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Super Air Knife EXAIR – 5 Proven Ways to Improve Industrial Blowoff & Reduce Compressed Air Waste
The EXAIR Super Air Knife is a high-performance compressed air curtain system designed to deliver uniform laminar airflow for industrial blowing, cleaning, drying, cooling, and conveying applications.
- ✓Uniform laminar airflow across the full knife length with a 40:1 air amplification ratio.
- ✓Surprisingly quiet — only 69 dBA noise level with very low compressed air consumption.
- ✓Available in aluminum, stainless steel, and PVDF — lengths from 3 to 108 inches.
- ✓CE compliant and OSHA approved for industrial blowing, cleaning, drying, and cooling applications.
- ✓Reliable EXAIR Super Air Knife systems for compressed air optimization and energy savings.
Super Air Knife EXAIR – 5 Proven Ways to Improve Industrial Blowoff & Reduce Compressed Air Waste
The EXAIR Super Air Knife is a high-performance compressed air curtain system designed to deliver uniform laminar airflow for industrial blowing, cleaning, drying, cooling, and conveying applications.
- ✓Uniform laminar airflow across the full knife length with a 40:1 air amplification ratio.
- ✓Surprisingly quiet — only 69 dBA noise level with very low compressed air consumption.
- ✓Available in aluminum, stainless steel, and PVDF — lengths from 3 to 108 inches.
- ✓CE compliant and OSHA approved for industrial blowing, cleaning, drying, and cooling applications.
- ✓Reliable EXAIR Super Air Knife systems for compressed air optimization and energy savings.
Circular Air Curtain – EXAIR Super Air Wipe – 5 Proven Ways to Clean & Dry Cylindrical Parts
The EXAIR Super Air Wipe is a high-efficiency circular air curtain designed for uniform 360° cleaning, drying, and cooling of cables, hoses, pipes, wires, and extrusion products with minimal compressed air consumption.
- ✓Uniform 360° airflow for complete surface coverage with low compressed air consumption.
- ✓Silent industrial operation with no moving parts for maintenance-free performance.
- ✓Stainless steel construction with high temperature resistance up to 420°C.
- ✓Easy split design installation — adjustable airflow and blowing force.
- ✓Reliable EXAIR air curtain for cables, hoses, pipes, tubing, and extrusion products.
Circular Air Curtain – EXAIR Super Air Wipe – 5 Proven Ways to Clean & Dry Cylindrical Parts
The EXAIR Super Air Wipe is a high-efficiency circular air curtain designed for uniform 360° cleaning, drying, and cooling of cables, hoses, pipes, wires, and extrusion products with minimal compressed air consumption.
- ✓Uniform 360° airflow for complete surface coverage with low compressed air consumption.
- ✓Silent industrial operation with no moving parts for maintenance-free performance.
- ✓Stainless steel construction with high temperature resistance up to 420°C.
- ✓Easy split design installation — adjustable airflow and blowing force.
- ✓Reliable EXAIR air curtain for cables, hoses, pipes, tubing, and extrusion products.
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
Exair Fluid Atomizing Nozzles
All stainless steel construction for durability and corrosion resistance.
- Easily regulate and control the amount of atomized liquid !
- Various spray patterns to cover different applications!
- Patented drip-free attachment available as an option!
- Available in internal mix, external mix and siphon fed!
