Clamp-on Current Meter
Clamp-on Current Meter
- Up to 1000 A. Simpler and more accurate than conventional means.
Description
What you should know
The temperature transmitter is a sensor designed to measure the temperature of liquids, vapors, compressed air and gases within the permissible operating parameters. These parameters can be found in the technical data section. The temperature transmitter is not designed for use in explosive areas. For use in explosive areas, please contact the manufacturer. The temperature transmitter is mainly used in compressed air systems in industrial environments.
Applications
Current sensing on compressors for load/unload analysis.
Current sensing for power/energy measurement.
Evaluation of machine operating hours.
Advantages
Easy installation.
Wide measurement range.
Accurate current detection
4-20 mA output signal
Downloads
Related Products
Exair Cabinet Coolers
Stop electronic control downtime caused by heat, dirt and humidity!
- Keep line control boards cool and pressurized!
- Can be easily installed on any electronic board!
- Maintain board integrity according to NEMA 12, 4 or 4X!
- Comply with American and European UL and CE standards!
Exair Cabinet Coolers
Stop electronic control downtime caused by heat, dirt and humidity!
- Keep line control boards cool and pressurized!
- Can be easily installed on any electronic board!
- Maintain board integrity according to NEMA 12, 4 or 4X!
- Comply with American and European UL and CE standards!
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Cooling systems for dry machining – Cold Gun Exair
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications
Vac-u-Gun Exair Pneumatic Hand Vacuum Vacuum Cleaner
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications.
Vac-u-Gun Exair Pneumatic Hand Vacuum Vacuum Cleaner
Move parts, materials or scrap – without using moving parts!
- Easily move granular material such as pellets or grains.
- Simple to install, can be retrofitted to existing pipelines.
- Various materials and diameters available for all applications.
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
Pneumatic Vacuum Cleaner for CNC – Chip Trapper Exair
Extend the life of cutting oils and coolants in machining operations.
- Easily and quickly filter CNC machine storage tanks!
- Prevent production downtime due to dirty coolant or clogged pipes!
- Available in 5, 30, 55 and 110 Gallon sizes!
- Separate different materials to maximize recycling potential!
Ionized Air Cannon – Ion Air Cannon Exair Gen 4
The Ion Air Cannon Exair Gen 4 delivers a powerful concentrated ionized air flow to eliminate static electricity and dust from surfaces, parts, and materials in industrial processes — quietly and efficiently.
- ✓No moving parts — completely maintenance-free operation with high instantaneous ionized air flow.
- ✓Adjustable flow and force using slats for precise static elimination control.
- ✓Base for easy mounting and placement in any industrial environment.
- ✓Quiet and efficient Ion Air Cannon Exair Gen 4 — reliable Gen 4 static elimination technology.
Ionized Air Cannon – Ion Air Cannon Exair Gen 4
The Ion Air Cannon Exair Gen 4 delivers a powerful concentrated ionized air flow to eliminate static electricity and dust from surfaces, parts, and materials in industrial processes — quietly and efficiently.
- ✓No moving parts — completely maintenance-free operation with high instantaneous ionized air flow.
- ✓Adjustable flow and force using slats for precise static elimination control.
- ✓Base for easy mounting and placement in any industrial environment.
- ✓Quiet and efficient Ion Air Cannon Exair Gen 4 — reliable Gen 4 static elimination technology.
Super Air Knife EXAIR – 5 Proven Ways to Improve Industrial Blowoff & Reduce Compressed Air Waste
The EXAIR Super Air Knife is a high-performance compressed air curtain system designed to deliver uniform laminar airflow for industrial blowing, cleaning, drying, cooling, and conveying applications.
- ✓Uniform laminar airflow across the full knife length with a 40:1 air amplification ratio.
- ✓Surprisingly quiet — only 69 dBA noise level with very low compressed air consumption.
- ✓Available in aluminum, stainless steel, and PVDF — lengths from 3 to 108 inches.
- ✓CE compliant and OSHA approved for industrial blowing, cleaning, drying, and cooling applications.
- ✓Reliable EXAIR Super Air Knife systems for compressed air optimization and energy savings.
Super Air Knife EXAIR – 5 Proven Ways to Improve Industrial Blowoff & Reduce Compressed Air Waste
The EXAIR Super Air Knife is a high-performance compressed air curtain system designed to deliver uniform laminar airflow for industrial blowing, cleaning, drying, cooling, and conveying applications.
- ✓Uniform laminar airflow across the full knife length with a 40:1 air amplification ratio.
- ✓Surprisingly quiet — only 69 dBA noise level with very low compressed air consumption.
- ✓Available in aluminum, stainless steel, and PVDF — lengths from 3 to 108 inches.
- ✓CE compliant and OSHA approved for industrial blowing, cleaning, drying, and cooling applications.
- ✓Reliable EXAIR Super Air Knife systems for compressed air optimization and energy savings.
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Chip Vac Exair Pneumatic Burr Vacuum Cleaner
Heavy duty industrial vacuum cleaner for chips and burrs!
- No electricity required for operation!
- It has a high capacity filter to prevent the escape of debris!
- It has no moving parts to damage or clog!
- No maintenance required, can operate continuously!
Ionized Air Curtain – Super Ion Air Knife Exair Gen 4
The Super Ion Air Knife EXAIR Gen 4 delivers a powerful ionized air curtain that eliminates static electricity across wide surfaces — preventing production stoppages and electric shocks with no moving parts.
- ✓No moving parts — completely maintenance-free with high instantaneous ionized air flow.
- ✓Uniform ionized air flow along the entire length for consistent static elimination.
- ✓40:1 air amplification ratio — maximum coverage with minimal compressed air consumption.
- ✓Reliable Super Ion Air Knife EXAIR Gen 4 — OSHA compliant and CE certified.
Ionized Air Curtain – Super Ion Air Knife Exair Gen 4
The Super Ion Air Knife EXAIR Gen 4 delivers a powerful ionized air curtain that eliminates static electricity across wide surfaces — preventing production stoppages and electric shocks with no moving parts.
- ✓No moving parts — completely maintenance-free with high instantaneous ionized air flow.
- ✓Uniform ionized air flow along the entire length for consistent static elimination.
- ✓40:1 air amplification ratio — maximum coverage with minimal compressed air consumption.
- ✓Reliable Super Ion Air Knife EXAIR Gen 4 — OSHA compliant and CE certified.
